PRONCIPLE
Principle
Principle of laser cutting
Laser cutting is to use high-power density laser beam to scan the material surface, melt or vaporize the material in a very short time, melt or vaporize the material, formed narrow seam (0.15mm)and then blow the melted or vaporized material away from the incision with high-pressure gas, so as to achieve the purpose of cutting the material.
ADVANTAGE
Technical Advantages
-
Tab laser notching
-
Laser notching
-
Laser slitting
-
Carbon brazing sheet cutting
-
Stainless steel sheet micropores
-
Lightning cutting
-
Pipe bevel cutting
-
Tab laser notching- The leading chase-cutting technology of tabs can realize flexible control with variable power and frequency, reducing burr, HAZ, foil exposure and other quality problems.
-
Laser notching- The original technology replaces the traditional die cutting and controls the laser cutting route by pre-setting process parameters, achieving higher accuracy, consistency and battery quality.
-
Laser slitting- The original design integrates slitting with tab notching, bringing 46% higher unit output and 33% lower equipment maintenance cost.
-
Carbon brazing sheet cutting- 0.12-0.16 mm carbon fiber sheet cutting, cutting accuracy increased from 0.05 to 0.02 mm ;
- After processing, there is no lattice deformation, no burr, no wire stripping and no scratch on the glue surface.
-
Stainless steel sheet micropores- Leading technology,laser welding and cutting integration.
- Connect 0.3 mm thin-walled large aluminum shell, 0.1 mm thin-walled large steel shell and cover plate, and the quality of welding / cutting is stable.
-
Lightning cutting- Reduce the formation of burrs and slag adhesion in processed products.
- Improve the speed of the laser reaching the cutting plate. When using 6KW machine to process 5mm stainless steel plate, the speed is 6m/min higher than normal cutting, and the overall processing efficiency can be increased 67%.
- Lower Cutting gas consumption, Compared with normal cutting, when using 6KW machine to cut 6mm stainless steel, less cutting gas is used, reduce up to 54% energy consumption.
-
Pipe bevel cutting- Accurate bevel angle, high cutting quality, smooth and flat cross section, realize seamless splicing of pipe workpieces,better meet the medium-thick pipes bevel welding quality requirements of bevel welding of medium-thick pipes.
- Achieve continuous cutting, and the quality of batch processing is stable. The workpiece does not need a lot of manual grinding, which effectively reduces labor costs and time investment.
APPLICATION
Application
-
3C -
Photovoltaic -
New display -
EV power -
Sheet-metal working
PRODUCTS
Products
Products relative to laser cutting
-
EV Battery
-
Electronics
-
Photovoltaic
-
Smart Home
-
Life Sciences
-
Modern Building
-
Transports
-
Sheet-metal Working
-
-
View Products
High-Speed S-Shape Laser Notching Machine-
Large plate supporting structure on both sides
-
Integrated functions of pre-slitting, tab notching and slitting; small floor space
-
S-shape tab-notching and shared use of foil to save material costs
-
High efficiency in dust removal with multiple dust removal systems
-
-
View Products
High-Speed Laser Notching & Cross-cutting Integrated Machine-
Suitable for stacking process
-
The equipment adopts large plate supporting structure on one side
-
Magazine is applied to receive materials and is transferred by logistic line
-
High processing efficiency with consistent cutting quality
-
-
View Products
High-Speed Laser Notching & Slitting Integrated Machine (Horizontal)-
Large plate supporting structure on both sides
-
High processing efficiency with consistent cutting quality
-
Highly accurate feeding unit
-
High speed laser dynamic controlling system
-
-
View Products
High-Speed Laser Notching & Slitting Integrated Machine (Vertical)-
Cantilever supporting structure with large board on single side
-
High processing efficiency with consistent cutting quality
-
Highly accurate feeding unit
-
High speed laser dynamic controlling system
-
-
View Products
High-speed laser notching machine-
Cantilever supporting structure with large plate on single side
-
High processing efficiency with consistent cutting quality
-
Highly accurate feeding unit
-
High speed laser dynamic controlling system
-
-
-
-
View Products
Precision Laser Cutting Machine-
Take pictures of cutting products accurately by 2900W camera, generate DWG graphics, secondary positioning by 500W CCD, automatic correction of cutting position, to maximize the efficiency of laser machine
-
Automatically record the process data,products can be one-button switch
-
Record the operator 's login, parameter modification, cutting, and completely automatically record the operator 's cutting information and cutting files
-
The complete database function is convenient for customers to establish different cutting parameter database according to different materials
-
-
View Products
Roll to Slice Covering Film Laser Cutting Machine-
It can switch between roll-to-roll & roll-to-slice processing
-
The intelligent light splitting device ( 1 laser ), double-head synchronous processing, can adjust the working power of each platform separately.
-
The double-head flight synchronization system and power monitoring system have high production efficiency, stability and high cutting accuracy.
-
CCD visual pre-scanning and automatic target grasping positioning, capable of a variety of visual positioning features, such as cross, solid circle, hollow circle, L-shaped right-angle side, etc.
-
-
View Products
Single Station Laser Cutting&forming Machine-
The international first-class brand laser with good beam quality, small focusing spot and high cutting quality.
-
High-precision, low-drift galvanometer system combined with the marble linear motor platform, the cutting accuracy can be micron level.
-
After design and optimization of the sealed optical path, the laser power is more stable, which ensures the effects of cutting.
-
CCD visual pre-scanning and automatic target grasping positioning, capable of a variety of visual positioning features, such as cross, solid circle, hollow circle, L-shaped right-angle side, etc.
-
-
View Products
Double Station Laser Cutting Machine-
Stress-free cutting avoids product damage caused by stress of material.
-
Dust free and environmental friendly.
-
The section of cutting surface is smooth and neat without burr and carbonization.
-
Applicable for the cutting of soft and hard bonding plates, with high precision for plate splitting.
-
-
View Products
PCB/FPC Online Laser Cutting Machine-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
View Products
Auto Laser Cutting Machine-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
-
-
View Products
Professional Laser Tube Cutting Machine-
Professional laser cutting machine with large range of pipe diameters and many types of processing, strong applicability.
-
The pneumatic, fully sealed, integral type chuck is more stable,with large clamping force, high machining precision and prominent effect of dust prevention,leading the industry.
-
Tube follow-up auxiliary support, effectively guarantee cutting accuracy.
-
Standard servo follow-up unloading, more accurate and efficient.
-
-
View Products
Transparent Brittle Material Precision Laser Cutting Machine-
Marble precision platform, stable bearing, corrosion resistance.
-
The machining platform is driven by linear motor and optical ruler in closed loop, which is easy to maintain and has high precision.
-
Infrared picosecond laser, small processing heat affected area, especially suitable for fine cutting.
-
Imported vacuum generator is adopted. Ensure the stability of product adsorption positioning.
-
-
View Products
Automation Nondestructive Laser Scribing Equipment-
The machine adopts industrial PC control, modular flexible programming design;
-
Compatible with solar cell from 156mm to 230mm
-
Good stability in processing, small heat-effected zone, less dust,High yield
-
High conversion
-
-
-
-
View Products
High Precision Laser Automatic Wafer Cutting Equipment-
Realize high-precision cutting of wafer brittle materials without chipping and cracks
-
Hymson company self-developed cutting head to achieve cutting of glass of different thicknesses
-
Compatible with different types and sizes of products
-
-
View Products
HF-A Series Fiber Laser Cutting Machine-
Mobile operating table, for easy operation.
-
Flexible application of single table, small footprint and high availability.
-
The mortise and tenon joint structure ensure the long-term stability of the machine.
-
Master6000S bus control system, deeply developed, easy to operate, intelligent and efficient.
-
-
View Products
Professional Laser Tube Cutting Machine
-
Professional laser cutting machine with large range of pipe diameters and many types of processing, strong applicability.
-
The pneumatic, fully sealed, integral type chuck is more stable,with large clamping force, high machining precision and prominent effect of dust prevention,leading the industry.
-
Tube follow-up auxiliary support, effectively guarantee cutting accuracy.
-
Standard servo follow-up unloading, more accurate and efficient.
-
-
-
-
View Products
Double Station Laser Cutting Machine
-
Stress-free cutting avoids product damage caused by stress of material.
-
Dust free and environmental friendly.
-
The section of cutting surface is smooth and neat without burr and carbonization.
-
Applicable for the cutting of soft and hard bonding plates, with high precision for plate splitting.
-
-
View Products
PCB/FPC Online Laser Cutting Machine
-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
View Products
Auto Laser Cutting Machine
-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
-
-
View Products
HF-C Series Fiber Laser Cutting Machine-
Modular design and quality matching of the whole machine.
-
The mortise and tenon joint structure ensure the long-term stability of the machine.
-
High-strength drawn aluminum crossbeam design for superior dynamic performance.
-
Fully encircled machine with double platform,safe and efficient production.
-
-
View Products
Double Station Laser Cutting Machine
-
Stress-free cutting avoids product damage caused by stress of material.
-
Dust free and environmental friendly.
-
The section of cutting surface is smooth and neat without burr and carbonization.
-
Applicable for the cutting of soft and hard bonding plates, with high precision for plate splitting.
-
-
View Products
PCB/FPC Online Laser Cutting Machine
-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
View Products
Auto Laser Cutting Machine
-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
View Products
High Precision Laser Automatic Wafer Cutting Equipment
-
Realize high-precision cutting of wafer brittle materials without chipping and cracks
-
Hymson company self-developed cutting head to achieve cutting of glass of different thicknesses
-
Compatible with different types and sizes of products
-
-
View Products
Transparent Brittle Material Precision Laser Cutting Machine
-
Marble precision platform, stable bearing, corrosion resistance.
-
The machining platform is driven by linear motor and optical ruler in closed loop, which is easy to maintain and has high precision.
-
Infrared picosecond laser, small processing heat affected area, especially suitable for fine cutting.
-
Imported vacuum generator is adopted. Ensure the stability of product adsorption positioning.
-
-
-
-
View Products
Double Station Laser Cutting Machine
-
Stress-free cutting avoids product damage caused by stress of material.
-
Dust free and environmental friendly.
-
The section of cutting surface is smooth and neat without burr and carbonization.
-
Applicable for the cutting of soft and hard bonding plates, with high precision for plate splitting.
-
-
View Products
PCB/FPC Online Laser Cutting Machine
-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
View Products
Auto Laser Cutting Machine
-
No dust. Minor pollution to the environment
-
The cut surface section is smooth without burr and carbonization.
-
Non-stress cutting. Can avoid product damage caused by material stress.
-
Applicable to cutting soft and hard combination plates. The accuracy of plate splitting is high.
-
-
View Products
3D Laser cutting machine-
Adopt robot + fiber laser 3D cutting instead of die stamping and mechanical engraving and milling for cutting edge punching of shaped pipe fittings.
-
Effective save moulds, shorten the product development cycle, improve processing efficiency and achive fexible production.
-
Realize ring cutting, save the time of indexing machine rotation or manual secondary clamping, high efficient processing.
-
Can be equipped with dual robot workstations to realize dual-station material change and linked cutting at the same time, the cutting efficiency has greatly improved.
-
-
View Products
High Precision Laser Automatic Wafer Cutting Equipment
-
Realize high-precision cutting of wafer brittle materials without chipping and cracks
-
Hymson company self-developed cutting head to achieve cutting of glass of different thicknesses
-
Compatible with different types and sizes of products
-
-
-
-
View Products
HF-C Series Fiber Laser Cutting Machine
-
Modular design and quality matching of the whole machine.
-
The mortise and tenon joint structure ensure the long-term stability of the machine.
-
High-strength drawn aluminum crossbeam design for superior dynamic performance.
-
Fully encircled machine with double platform,safe and efficient production.
-
-
View Products
Customized Laser Tube Cutting Machine-
Professional chucks with large clamping force and fully sealed rear chucks with good dustproof effect.
-
Special for long tube and heavy tube cutting, high cutting precision, can achieve "zero length of cutting residue".
-
The auxiliary support adopts servo follow-up to effectively prevent the pipe from swaying from side to side when rotating at high speed,thus guarantees the precision of turning during cutting.
-
Full penetration three chucks, four chucks collaborative linkage, can achieve real zero cutting residue, improve material utilization.
-
-
View Products
Automatic Laser Tube Cutting Machine-
Automatic high standard laser tube cutting machine, which is specific and common use in industry and suitable for intensity continuous production tube processing
-
High degree of automation, standard with Hymen patented fully automatic loading system. High success rate of loading and dividing feeding, the advantage of tube changing beat is obvious, strong stability, industry leading.
-
Extensible automatic tube laser cutting production line,highly continuous, stable, accurate and fast production,greatly improve production efficiency and reduce costs.
-
Wide range of tube diameter can be processed , wide range of stroke, suitable for high-speed and high-precision cutting of multiple types of pipes.
-
-
View Products
Standard Laser Tube Cutting Machine-
Professional tube cutting, high precision, high speed cutting and fast acceleration.
-
Wide range of processed pipe diameters and types: Circular Tubes：Φ10mm~Φ220mm Square Tubes and Rectangular Tubes：□10mm~□150mm
-
Automatic pneumatic fully enclosed chuck with clamping force up to 300kg, industry leading.
-
High-speed, high-precision modules to improved performance and processing accuracy.
-
-
View Products
High-speed Laser Tube Cutting Machine for Small Tubes-
Tube Specification：Circular Tubes : Φ15mm~Φ85mm;Square Tubes and Rectangular Tubes：□15x15mm-□60x60mm.
-
Superb applicability, cutting off, hole cutting, bevel cutting can be satisfied.
-
Fast machining speed! Acceleration up to 1.2g.
-
Positioning Accuracy of Cut Product: 0.01mm, Accuracy of Mass Cutting ≦±0.15mm.
-
-
View Products
HF-TU Series-
Laser cutting for metal coils.
-
Integrated automatic of loading, uncoiling, leveling, feeding, cutting and unloading.
-
Real-time in-line cutting, simultaneous cutting and feeding, continuous production and processing.
-
-
Inquiry
Inquiry
Click to inquiry
Customer service
Customer Service
Contact us